# Are You Facing Issues With Thread Tapping Process?

&#x20;

![10995985\_817405614963865\_3391415200228387352\_n.jpg](https://justpaste.it/img/small/e644093d20eae69d56f93309cdd69aa8.jpg)

Do you constantly run into issues with the thread tapping process because the [ACME thread tap](https://www.gaugestools.com/acme-tap-acme-thread-tap-stub-acme-tap/) or the trapezoidal thread tap you are using in the tapping process is breaking frequently? This is one of the most common challenges faced by the companies that are into component manufacturing industry.&#x20;

If there are any issues with the tapping process such as the breaking of the [trapezoidal thread taps](https://www.gaugestools.com/trapezoidal-tap-metric-trapezoidal-thread-tap/) in the component you are tapping, your manufacturing process would be stalled until you remove the broken tool from the component. This could at times become a very trying process and not only that you could end up damaging the parts that were being tapped.&#x20;

In the manufacturing cycle threads are tapped as the last step of the manufacturing process, at this stage if something goes wrong and if you happen to damage the products, you are manufacturing, you would have to simply discard the part or the entire component. This will affect your manufacturing unit in two ways. Firstly, you will be losing a lot of time in putting things right and in restarting the tapping process. Secondly, you would be wasting a lot of money too when the manufactured components need to be discarded.&#x20;

Despite the various technological developments and advancements, it is still not possible to run the tapping process without breaking of the tapping tool. At its best, you could just bring down the rate of breaking by taking adequate preventive measures.&#x20;

To start with, find the best manufacturer in the industry to take care of your requirements. Do not rush to source your thread taps from some random suppliers. You know the consequences if you were to make any mistakes here.&#x20;

Identify the vulnerability points and you will be able to reduce the breaking rate. If you bring down the hole size to 75%, the tap breaking scenarios would come down drastically.&#x20;

Keep washing the chips produced during the chipping process so that the tap does not get stuck in the chips resulting in the breakage of the taps. Now regardless of the measures you take to reduce the tap breaking instances, you are still going to run issues but with a reduced frequency. Just make sure that you are adequately stocked with the right type of thread tapping tools so that you can continue with the manufacturing process without having to wait for the thread tapping tool to be delivered to you.

**Contact**

Chenchuan Tools Co.,LTD

Chenbei Industry Zone,

Longgang Road, Huangshi,&#x20;

Hubei China,435202

Tel: 0714-7321211

Fax: 0714-7321210
